PRODUCT NAME:  NEPTUNE Waterbased Wood Floor Finish                              HMIS CODES:  H    F   R    P

PRODUCT CODE:  CF-590, CF-550, CF-520                                                                                 1    0    0    B

SECTION I - MANUFACTURER IDENTIFICATION

MANUFACTURER'S NAME:       Precision Technology LLC

ADDRESS:                               4052 Getwell Road

                                                Memphis, TN 38118

EMERGENCY PHONE:              877-363-0088                 DATE PRINTED:  November 15, 2003

INFORMATION PHONE: 901-363-0526                 NAME OF PREPARER:  Precision Technology LLC

SECTION II - HAZARDOUS INGREDIENTS / SARA III INFORMATION

                                                                                                              Occupational                   VAPOR

Exposure Limits PRESSURE

REPORTABLE COMPONENTS           CAS #                  %WEIGHT     ACGIH-TLV   OSHA-PEL    mm Hg

__________________________________________________________________________________________

Ethylene Glycol Monobutyl Ether                  111-76-2                       <5%                    25 PPM            50 PPM         0.8 @ 20C

N-Methylpyrrolidone                                        872-50-4                      5-10%                   N/E                       N/E            0.24 @ 20C                                                          

* Indicates toxic chemical(s) subject to the reporting requirements of Section 313 of Title III and of 40 CFR 372.

SECTION III - PHYSICAL / CHEMICAL CHARACTERISTICS

BOILING RANGE:  >212F (100C)                                    EVAPORAION RATE:  Slower than n-Butyl Acetate

% VOLATILE - WT: 66                                                   DENSITY:  8.5 LBS / GAL (1.04 KG/L)

VAPOR DENSITY:  Heavier than air                                 SOLUBILITY IN WATER:  Miscible

APPEARANCE AND ODOR:  White, milky liquid with a mild odor

SECTION IV - FIRE AND EXPLOSION HAZARD DATA

FLAMMABILITY CLASSIFICATION:  Non-Flammable

FLASH POINT:   Over 200F (93C) PMCC

FLAMMABLE LIMITS IN AIR BY VOLUME -    LOWER:  N/A UPPER:  N/A

EXTINGUISHING MEDIA:  Foam, Carbon Dioxide, Dry Chemical

SPECIAL FIREFIGHTING PROCEDURES:

Water may be used to cool containers to prevent pressure build-up.

UNUSUAL FIRE AND EXPLOSION HAZARDS

Closed containers may explode (due to the build up of steam pressure)  when exposed to extreme heat.

SECTION V – REACTIVITY DATA

STABILITY:   Stable

CONDITIONS TO AVOID:

N/A

INCOMPATIBILITY (MATERIALS TO AVOID):

Strong oxidizers such as permangante.

HAZARDOUS DECOMPOSITION OR BYPRODUCTS

Usual products of combustion, e.g. Carbon Monoxide, Carbon Dioxide, Nitrogen Oxides

HAZARDOUS POLYMERIZATION:  N/A

SECTION VI – HEALTH HAZARD DATA

INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE

Inhalation: Slight irritation of nasal passages.

EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE

May cause burning and redness.

SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE

Skin contact: May cause irritation and defatting.

INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE

May cause nausea and vomiting.

HEALTH HAZARDS (ACUTE AND CHRONIC)

N/A

CARCINOGENICITY:  N/A

    NTP CARCINOGEN:    N/A       IARC MONOGRAPHS:  No            OSHA REGULATED: Yes

MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE

Anesthesia, respiratory tract irritation, dermititis, nausea, and vomiting

EMERGENCY AND FIRST AID

Inhalation overexposure:  Move person to fresh air.  If breathing stops, apply artificial respiration and seek immediate medical attention.  Eye contact: Flush with large quantities of water for 15 minutes.  Skin contact: Wash thoroughly with soap and water and see a doctor.  Ingestion:  Do not induce vomiting, can cause chemical pneumonia and pulmonary edema.  Contact a physician immediately.

REGULATORY DATA:  Section 313 supplier notification:  This product contains the following chemical(s) subject to the reporting requirements of Section 313 of Title III of the Superfund Amendment and Reauthorization Act of 1986 and 40CFR 372:  N-Methyl-2-Pyrrolidone.  This product contains the following chemical(s) which are know to the state of California to cause cancer or to cause birth defects or other reproductive harm:  None.

SECTION VII – PRECAUTIONS FOR SAFE HANDLING AND USE

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED

Eliminate ignition sources, provide good ventilation, dike spill area and add absorbent earth or sawdust to spilled liquid.  Thoroughly wet with water and mix.  Remove with inert absorbent.

WASTE DISPOSAL METHOD

Collect absorbent/water/spilled liquid mixture into containers and add enough water to cover.  Consult local, state, and federal hazardous waste regulation before disposing into approved hazardous waste landfills.  Obey relevant laws.

PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING

Material should be stored in a cool area between (60F – 85F).  Once mixed with Neptune Hardener part B, do not recap container with mixture.  Pressure due to carbon dioxide release will build up in capped container with mixture.

SHIPPING INFORMATION:  Not regulated as a DOT hazardous material.

SECTION VIII – CONTROL MEASURES

RESPIRATORY PROTECTION

Use a NIOSH-approved, air-supplied or air-purifying respirator or full gas mask for organic vapors and acids in areas where vapor concentrations may be above TLV limit.

VENTILATION

General mechanical ventilation or local exhaust should be suitable to keep vapor concentrations below TLV. 

PROTECTIVE GLOVES

Impermeable chemical handling gloves for skin protection such as nitrile rubber.

EYE PROTECTION

Use chemical safety glasses, splash goggles, and face shields for eye protection.

OTHER PROTECTIVE CLOTHING OR EQUIPMENT

Use impermeable aprons or protective clothing whenever possible to prevent skin contact.

HYGIENIC PRACTICES

Wash hands with soap and water before eating or using rest rooms.

SECTION IX – DISCLAIMER

This information is accurate to the best knowledge of Precision Technology LLC (901) 363-0526, but is furnished without any expressed or implied warranties.

BEFORE USING ANY PRODUCT, READ THE LABEL.