PRODUCT NAME: PRECISION FULL TROWEL WOOD FILLER HMIS CODES: H F R P
PRODUCT CODE: WF-800 Red Oak 2 1 0 X
WF-810 White Oak
WF-820 Maple
WF-830 Walnut
SECTION I - MANUFACTURER IDENTIFICATION
MANUFACTURER'S NAME: Precision Technology LLC
ADDRESS: 4052 Getwell Road
Memphis, TN 38118
EMERGENCY PHONE: 800-424-9300 DATE PRINTED: November 15, 2003
INFORMATION PHONE: 901-363-0526 NAME OF PREPARER: Precision Technology LLC
SECTION II - HAZARDOUS INGREDIENTS / SARA III INFORMATION
OCCUPATIONAL EXPOSURE VAPOR PRESSURE
__________________________________________________________________________________________
Clay 1332-50-7 4-8
Mica 1318-94-1 5-7
Calcium Carbonate 471-34-1 40-45
Pigments
Magnesium Carbonate 546-93-0 <1
Crystalline Silicon 14808-60-7 <1
Acetaldehyde 75-07-0 <.001
Vinyl Acetate 108-05-4 <.010
* Indicates toxic chemical(s) subject to the reporting requirements of Section 313 of Title III and of 40 CFR 372.
SECTION III - PHYSICAL / CHEMICAL CHARACTERISTICS
BOILING RANGE: 212oF SPECIFIC GRAVITY (H2O=1): 1.4
VAPOR DENSITY: (Air=1) N/A EVAPORATION RATE: N/A
COATING V.O.C.: MATERIAL V.O.C.: N/A
APPEARANCE AND ODOR: Yellow to dark brown colors, odor acrylic like
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
FLASH POINT: Non-Flammable METHOD USED:
FLAMMABLE LIMITS IN AIR BY VOLUME – Non-Flammable
EXTINGUISHING MEDIA: Water
SPECIAL FIREFIGHTING PROCEDURES:
Carbon dioxide or carbon monoxide release during thermal decomposition
SECTION V – REACTIVITY DATA
STABILITY: Stable
CONDITIONS TO AVOID: None
INCOMPATIBILITY (MATERIALS TO AVOID):
Avoid contact with oxidizing agents, strong acids or bases.
HAZARDOUS DECOMPOSITION OR BYPRODUCTS:
Carbon dioxide and carbon monoxide releases when heated
HAZARDOUS POLYMERIZATION
Will not occur.
SECTION VI – HEALTH HAZARD DATA
INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Wear an approved NSHA/NIOSH dust mask when anding to protect from dust
SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE
May cause eye irritation.
SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Skin irritant.
INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
May be harmful if swollowed.
CARCINOGENICITY
This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE
Unknown
EMERGENCY AND FIRST AID
Eyes: Wash eyes gently with water for at least 15 minutes. Get medical attention.
Skin: Remove contaminated clothing. Wash exposed areas with water and soap
Ingestion: Get Medical Attention.
Inhalation: Move to fresh air immediately
This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
SECTION VII – PRECAUTIONS FOR SAFE HANDLING AND USE
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED
WASTE DISPOSAL METHOD
Dispose of in accordance with local, state and federal regulations.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING
Keep in dry, cool place. Keep container closed while not in use.
OTHER PRECAUTIONS
N/A.
SECTION VIII – CONTROL MEASURES
RESPIRATORY PROTECTION
NIOSH mask recommended.
VENTILATION
Open windows and doors; use adequate ventilation.
PROTECTIVE GLOVES
Rubber Gloves.
EYE PROTECTION
Use goggles when sanding
OTHER PROTECTIVE CLOTHING OR EQUIPMENT
N/A
SECTION X – DISCLAIMER
This information is accurate to the best knowledge of Precision Technology, LLC (901)363-0526, but is furnished without any expressed or implied warranties.